Acid hydrolysis
Preparation and Characterization of Micro (MCC) and Nano crystalline Cellulose (NCC) from Cotton Stem [Volume 30, Summer 2, 2015-2016, Pages 299-307]
Acidic hydrolysis
Optimum Production of Cellulose NanoCrystal from Cotton Stalk under Acidic Hydrolysis Condition [Volume 30, SPRING 1, 2015-2016, Pages 1-13]
Adhesion
An investigation on paintability of heat treated wood [Volume 30, WINTER 4, 2015-2016, Pages 717-727]
Adhesion strength of coating
Evaluate the effect of oil-heat treatment of Fir species on contact angle and adhesion strength of water based clear and acid catalyzed transparent coat [Volume 30, SPRING 1, 2015-2016, Pages 173-181]
Adhesion strength of coating
The effect of adding zinc oxide nanoparticles on color change and adhesion strength of polyurethane coating on wood surface [Volume 30, WINTER 4, 2015-2016, Pages 690-704]
Alder branch
The Investigation of the Utilization Impact of
Alnus subcordata Waste and Poplar Wood in Particle Board Production [Volume 30, SPRING 1, 2015-2016, Pages 37-45]
Alkali charge
Comparative study on pulping variables of cotton linters harvested from four different countries for alpha-cellulose pulp production [Volume 30, WINTER 4, 2015-2016, Pages 618-631]
Alpha cellulose
Comparative study on pulping variables of cotton linters harvested from four different countries for alpha-cellulose pulp production [Volume 30, WINTER 4, 2015-2016, Pages 618-631]
Aluminum dioxide
Influence of nano metals oxide treatment on medium density fiberboard properties made of sunflower straw fibers [Volume 30, SPRING 1, 2015-2016, Pages 97-109]
Analytical Hierarchy Process
Applying analytical hierarchy process in ranking of the effective indices on competitiveness of the wooden furniture industry in Iran [Volume 30, WINTER 4, 2015-2016, Pages 578-594]
ARIMA
Forecasting of printing and writing paper consumption in Iran using artificial neural network and classical methods [Volume 30, WINTER 4, 2015-2016, Pages 632-652]
Astara
Morphological Characteristics and Chemical Composition of Grapevine Branches (Vitis vinifera spp.) Grown in Astara [Volume 30, WINTER 4, 2015-2016, Pages 525-537]
Atomic Adsorption
A Study on the Possibility of Extraction, Identification and Removal of Metallic Ions and Resins in Bleached Bagass Pulp by ECF Stages [Volume 30, SPRING 1, 2015-2016, Pages 72-84]
B
Bagass
A Study on the Possibility of Extraction, Identification and Removal of Metallic Ions and Resins in Bleached Bagass Pulp by ECF Stages [Volume 30, SPRING 1, 2015-2016, Pages 72-84]
Bagasse fibers
Investigation on Morphological and Mechanical Properties of Coupling Agents on Baggass Polypropylene Composites [Volume 30, SPRING 1, 2015-2016, Pages 85-96]
Bamboo
An Investigation and comparison of newsprint properties from Bamboo and Reed CMP Pulps [Volume 30, Summer 2, 2015-2016, Pages 256-265]
Bending stiffness (MOE)
Gypsum bounded board production reinfoced with Date Palm (Phoenix dactylifera L.) pruning residues fibers [Volume 30, SPRING 1, 2015-2016, Pages 60-71]
BENDING STRENGTH (MOR)
Gypsum bounded board production reinfoced with Date Palm (Phoenix dactylifera L.) pruning residues fibers [Volume 30, SPRING 1, 2015-2016, Pages 60-71]
Bio-kratf pulp
Effect of Hornbeam chips fungal pre-treatment on bleachability of its Bio-kraft pulp [Volume 30, Fall 3, 2015-2016, Pages 419-429]
Bleachability
Effect of Hornbeam chips fungal pre-treatment on bleachability of its Bio-kraft pulp [Volume 30, Fall 3, 2015-2016, Pages 419-429]
Bleaching of Deinked Pulp
Optimization Process Variables of Deinked Pulp Bleaching - Improvement of Wet Tensile Strength of Tissue Paper [Volume 30, WINTER 4, 2015-2016, Pages 705-716]
BSTFA
Identification and comparison of oil compounds derived from pyrolysis of sound wood and decayed wood of beech by using Gas Chromatography and Mass Spectrometry (GC/MS) [Volume 30, Summer 2, 2015-2016, Pages 243-255]
Buyer Satisfaction
Evaluation of the effective indexes on industrial buyer satisfaction in the supply chain of the home wooden furniture industry in Tehran province [Volume 30, Fall 3, 2015-2016, Pages 475-490]
C
Calcium carbonate
Study of using water softening process byproduct, calcium carbonate on fine paper production [Volume 30, SPRING 1, 2015-2016, Pages 14-25]
Calcium carbonate
Potential of Agricultural Residues Fibers and mineral material in Wood Plastics Composites Production [Volume 30, Summer 2, 2015-2016, Pages 220-229]
Calligonum comosum shrub
Stem and root comparative wood anatomy of (Calligonum comosum)
In the deserts of Iran and short sight to technical properties of fabricated of particleboard from its wood [Volume 30, WINTER 4, 2015-2016, Pages 538-551]
Canola
Investigation of mechanical properties particleboard based on canola stalks and poplar wood by Response Surface Method (RSM) [Volume 30, Summer 2, 2015-2016, Pages 230-242]
Canola oil
An investigation on paintability of heat treated wood [Volume 30, WINTER 4, 2015-2016, Pages 717-727]
Cellulose Nanocrystal
Optimum Production of Cellulose NanoCrystal from Cotton Stalk under Acidic Hydrolysis Condition [Volume 30, SPRING 1, 2015-2016, Pages 1-13]
Cement
Effect of nano- wollastonite on microscopic, mechanical and physical properties of cement- wood fibers composite. [Volume 30, WINTER 4, 2015-2016, Pages 567-577]
Chemical components
Morphological Characteristics and Chemical Composition of Grapevine Branches (Vitis vinifera spp.) Grown in Astara [Volume 30, WINTER 4, 2015-2016, Pages 525-537]
Chemical properties
Anatomical, physical and chemical properties of Sepestan wood (Cordia myxa L.) in Iranshahr region [Volume 30, SPRING 1, 2015-2016, Pages 110-118]
Climate
Climate and environmental impacts on beech and oak wood
production in the Hyrcanian forests [Volume 30, Fall 3, 2015-2016, Pages 386-408]
CMP pulp
An Investigation and comparison of newsprint properties from Bamboo and Reed CMP Pulps [Volume 30, Summer 2, 2015-2016, Pages 256-265]
CMP pulp
Investigation on newsprint paper production from wheat straw and its specification [Volume 30, Summer 2, 2015-2016, Pages 320-329]
CMP pulp
Investigation on imported aspen admixture with two hardwoods
native forest species for CMP pulping [Volume 30, WINTER 4, 2015-2016, Pages 662-673]
Coating
The Effect of Chitosan - Poly (vinyl alcohol) Coatings on Strength and Barrier Properties of Packaging Paper [Volume 30, Summer 2, 2015-2016, Pages 330-340]
Color change
The effect of adding zinc oxide nanoparticles on color change and adhesion strength of polyurethane coating on wood surface [Volume 30, WINTER 4, 2015-2016, Pages 690-704]
Competitiveness Index
Applying analytical hierarchy process in ranking of the effective indices on competitiveness of the wooden furniture industry in Iran [Volume 30, WINTER 4, 2015-2016, Pages 578-594]
Composite
Investigation on utilization The mechanical of Fish wastes (WF) in manufacturing of biodegradable wood plastic composites (WPCs) and high density polyethylene (HDPE) [Volume 30, Fall 3, 2015-2016, Pages 362-375]
Composite
Effects of waste polyester fibers on the mechanical and thermal properties of WPC products [Volume 30, WINTER 4, 2015-2016, Pages 552-566]
Compression strength
Effect of nano- wollastonite on microscopic, mechanical and physical properties of cement- wood fibers composite. [Volume 30, WINTER 4, 2015-2016, Pages 567-577]
Contact angle
Evaluate the effect of oil-heat treatment of Fir species on contact angle and adhesion strength of water based clear and acid catalyzed transparent coat [Volume 30, SPRING 1, 2015-2016, Pages 173-181]
Contact angle
Investigation of gluability and wettability properties of Medium Density Fiberboard produced using vine pruning fibers in combination with wood fibers [Volume 30, Summer 2, 2015-2016, Pages 289-298]
Cooking temperature
Comparative study on pulping variables of cotton linters harvested from four different countries for alpha-cellulose pulp production [Volume 30, WINTER 4, 2015-2016, Pages 618-631]
Copper oxide
Influence of nano metals oxide treatment on medium density fiberboard properties made of sunflower straw fibers [Volume 30, SPRING 1, 2015-2016, Pages 97-109]
COTTON STALK
Investigating the Effect of Cotton Stalks Bark on Physical and Mechanical Properties of Cotton Stalk Flour- Polypropylene Composite [Volume 30, SPRING 1, 2015-2016, Pages 144-161]
COTTON STALK
Optimum Production of Cellulose NanoCrystal from Cotton Stalk under Acidic Hydrolysis Condition [Volume 30, SPRING 1, 2015-2016, Pages 1-13]
Coupling agent
Investigation on utilization The mechanical of Fish wastes (WF) in manufacturing of biodegradable wood plastic composites (WPCs) and high density polyethylene (HDPE) [Volume 30, Fall 3, 2015-2016, Pages 362-375]
Crown and branch of kiwi residues
The Possibility of Using Kiwi Wood Residues for Kraft Pulp and Liner Paper Production [Volume 30, Fall 3, 2015-2016, Pages 408-418]
D
Dalbergia sissoo (shisham)
Comparative on the Microscopic Properties of wood near the pith to bark in Dalbergia sissoo in ShoshDanial [Volume 30, Fall 3, 2015-2016, Pages 351-361]
Date plam
Gypsum bounded board production reinfoced with Date Palm (Phoenix dactylifera L.) pruning residues fibers [Volume 30, SPRING 1, 2015-2016, Pages 60-71]
DED sequence
Effect of Hornbeam chips fungal pre-treatment on bleachability of its Bio-kraft pulp [Volume 30, Fall 3, 2015-2016, Pages 419-429]
Deltoids poplar
Evaluating the addition of cellulose nano fibers to reinforce of high yield kraft pulp produced from P.deltoides clone 69-55 [Volume 30, WINTER 4, 2015-2016, Pages 606-617]
Differential Scanning Calorimeter
THE INVESTIGATION OF POLY LACTIC ACID /WHEAT STRAW FIBERS TREATED WITH SILANE COMPOSITES [Volume 30, Summer 2, 2015-2016, Pages 207-219]
Dimensional stability
Improvement of dimensional stability and mechanical properties of gypsum particleboard by adding white cement [Volume 30, SPRING 1, 2015-2016, Pages 132-143]
Dimensional stability
Effect of chemical modification of wood flour on properties of polypropylene-nano SiO2 hybrid nanocomposite [Volume 30, WINTER 4, 2015-2016, Pages 674-689]
Dissolving pulp
The potential of acid pre-hydrolyzed Soda-AQ process to manufacture highly purified α-cellulose [Volume 30, SPRING 1, 2015-2016, Pages 162-172]
E
Eastman G-3003
Investigation on Morphological and Mechanical Properties of Coupling Agents on Baggass Polypropylene Composites [Volume 30, SPRING 1, 2015-2016, Pages 85-96]
Elm wood species
The effect of adding zinc oxide nanoparticles on color change and adhesion strength of polyurethane coating on wood surface [Volume 30, WINTER 4, 2015-2016, Pages 690-704]
F
Fiberboard
Influence of nano metals oxide treatment on medium density fiberboard properties made of sunflower straw fibers [Volume 30, SPRING 1, 2015-2016, Pages 97-109]
Fiber refining
Investigation on the effect of cellulose fiber surface characteristics on mechanical properties of cellulose fiber /polypropylene composite [Volume 30, Summer 2, 2015-2016, Pages 183-193]
Fillers
Study of using water softening process byproduct, calcium carbonate on fine paper production [Volume 30, SPRING 1, 2015-2016, Pages 14-25]
Fir species
Evaluate the effect of oil-heat treatment of Fir species on contact angle and adhesion strength of water based clear and acid catalyzed transparent coat [Volume 30, SPRING 1, 2015-2016, Pages 173-181]
Floatation
Comparing the Performance of the Combination of Surfactant and Soap
in Wastepaper Deinking [Volume 30, SPRING 1, 2015-2016, Pages 26-36]
Forecasting
Forecasting of printing and writing paper consumption in Iran using artificial neural network and classical methods [Volume 30, WINTER 4, 2015-2016, Pages 632-652]
FTIR spectroscopy
Investigation on mechanical properties of HDPE recycled composite filled by furfural residue produced from bagasse [Volume 30, Fall 3, 2015-2016, Pages 376-387]
Fungal pre-treatment
Effect of Hornbeam chips fungal pre-treatment on bleachability of its Bio-kraft pulp [Volume 30, Fall 3, 2015-2016, Pages 419-429]
Furniture industry
Evaluation of the effective indexes on industrial buyer satisfaction in the supply chain of the home wooden furniture industry in Tehran province [Volume 30, Fall 3, 2015-2016, Pages 475-490]
G
G-3015 and G-3216
Investigation on Morphological and Mechanical Properties of Coupling Agents on Baggass Polypropylene Composites [Volume 30, SPRING 1, 2015-2016, Pages 85-96]
Gas chromatography
Identification and comparison of oil compounds derived from pyrolysis of sound wood and decayed wood of beech by using Gas Chromatography and Mass Spectrometry (GC/MS) [Volume 30, Summer 2, 2015-2016, Pages 243-255]
GC-MS
A Study on the Possibility of Extraction, Identification and Removal of Metallic Ions and Resins in Bleached Bagass Pulp by ECF Stages [Volume 30, SPRING 1, 2015-2016, Pages 72-84]
Gypsum board
Gypsum bounded board production reinfoced with Date Palm (Phoenix dactylifera L.) pruning residues fibers [Volume 30, SPRING 1, 2015-2016, Pages 60-71]
Gypsum particleboard
Improvement of dimensional stability and mechanical properties of gypsum particleboard by adding white cement [Volume 30, SPRING 1, 2015-2016, Pages 132-143]
H
HDPE
Chemical Treatment of Rice Husk with Acetic Acid substitute for MAPE Compatibilizer in Rice Husk/High Density Poly Ethylene Composites [Volume 30, Fall 3, 2015-2016, Pages 443-456]
HIGH DENSITY POLYETHYLENE
Study on the effect of polymer types and Quality of lignocellulosic materials on the Physical and Mechanical properties of wood/plastic composite [Volume 30, WINTER 4, 2015-2016, Pages 595-605]
Hybrid Composite
Evaluation of effect of Nano SiO2 on the physical, mechanical and morphological properties of hybrid Nano composite from polypropylene-wood flour [Volume 30, Summer 2, 2015-2016, Pages 266-277]
Hydraulic conductivity
Inter-relations between tree-ring width and vessel features in black alder (Alnus glutinosa) [Volume 30, Summer 2, 2015-2016, Pages 278-288]
Hypothesis
Evaluation of the effective indexes on industrial buyer satisfaction in the supply chain of the home wooden furniture industry in Tehran province [Volume 30, Fall 3, 2015-2016, Pages 475-490]
I
IB
Evaluation of Mechanical Properties of Homogeneous and layering Particleboards by Ultrasonic Technique [Volume 30, Summer 2, 2015-2016, Pages 341-349]
Image J
Inter-relations between tree-ring width and vessel features in black alder (Alnus glutinosa) [Volume 30, Summer 2, 2015-2016, Pages 278-288]
Industrial wooden fibers
Influence of nano metals oxide treatment on medium density fiberboard properties made of sunflower straw fibers [Volume 30, SPRING 1, 2015-2016, Pages 97-109]
Internal bond strength (I.B)
Gypsum bounded board production reinfoced with Date Palm (Phoenix dactylifera L.) pruning residues fibers [Volume 30, SPRING 1, 2015-2016, Pages 60-71]
K
Keywords
The possibility of utilization of soy straw powder in wood/plastic composites produced with polypropylene [Volume 30, Fall 3, 2015-2016, Pages 434-446]
Keywords: beech wood
Tensile and compressive load-bearing capacity of combined stresses investigated in connection with built-lingual Corner 45 ° Mobile [Volume 30, Summer 2, 2015-2016, Pages 308-319]
Keywords: Grapevine Branches
Morphological Characteristics and Chemical Composition of Grapevine Branches (Vitis vinifera spp.) Grown in Astara [Volume 30, WINTER 4, 2015-2016, Pages 525-537]
Key words: Hybrid nanocomposite
Effect of chemical modification of wood flour on properties of polypropylene-nano SiO2 hybrid nanocomposite [Volume 30, WINTER 4, 2015-2016, Pages 674-689]
Keywords: Wood–polymer composite
Investigation on the mechanical and decay resistance properties of wood modified with maleic anhydride and methyl metacrylate [Volume 30, Fall 3, 2015-2016, Pages 490-503]
Kraft pulp
The Possibility of Using Kiwi Wood Residues for Kraft Pulp and Liner Paper Production [Volume 30, Fall 3, 2015-2016, Pages 408-418]
Kraft pulp
Depended pH behavior of chitosan on surface modified fibers of Kraft pulp [Volume 30, Fall 3, 2015-2016, Pages 513-524]
M
Mass spectrometry
Identification and comparison of oil compounds derived from pyrolysis of sound wood and decayed wood of beech by using Gas Chromatography and Mass Spectrometry (GC/MS) [Volume 30, Summer 2, 2015-2016, Pages 243-255]
MECHANICAL PROPERTIES
Investigating the Effect of Cotton Stalks Bark on Physical and Mechanical Properties of Cotton Stalk Flour- Polypropylene Composite [Volume 30, SPRING 1, 2015-2016, Pages 144-161]
MECHANICAL PROPERTIES
Investigation on Morphological and Mechanical Properties of Coupling Agents on Baggass Polypropylene Composites [Volume 30, SPRING 1, 2015-2016, Pages 85-96]
MECHANICAL PROPERTIES
Potential of Agricultural Residues Fibers and mineral material in Wood Plastics Composites Production [Volume 30, Summer 2, 2015-2016, Pages 220-229]
MECHANICAL PROPERTIES
Investigation of mechanical properties particleboard based on canola stalks and poplar wood by Response Surface Method (RSM) [Volume 30, Summer 2, 2015-2016, Pages 230-242]
MECHANICAL PROPERTIES
The Effect Type of Chemical Treatment of Wood Material on Physical, Mechanical and Morphological Properties of Wood Flour / Polypropylene Hybrid Composite [Volume 30, SPRING 1, 2015-2016, Pages 119-131]
MECHANICAL PROPERTIES
Improvement of dimensional stability and mechanical properties of gypsum particleboard by adding white cement [Volume 30, SPRING 1, 2015-2016, Pages 132-143]
MECHANICAL PROPERTIES
Investigation on the effect of cellulose fiber surface characteristics on mechanical properties of cellulose fiber /polypropylene composite [Volume 30, Summer 2, 2015-2016, Pages 183-193]
MECHANICAL PROPERTIES
Investigation on utilization The mechanical of Fish wastes (WF) in manufacturing of biodegradable wood plastic composites (WPCs) and high density polyethylene (HDPE) [Volume 30, Fall 3, 2015-2016, Pages 362-375]
MECHANICAL PROPERTIES
The possibility of utilization of soy straw powder in wood/plastic composites produced with polypropylene [Volume 30, Fall 3, 2015-2016, Pages 434-446]
MECHANICAL PROPERTIES
The Possibility of Using Kiwi Wood Residues for Kraft Pulp and Liner Paper Production [Volume 30, Fall 3, 2015-2016, Pages 408-418]
MECHANICAL PROPERTIES
Chemical Treatment of Rice Husk with Acetic Acid substitute for MAPE Compatibilizer in Rice Husk/High Density Poly Ethylene Composites [Volume 30, Fall 3, 2015-2016, Pages 443-456]
MECHANICAL PROPERTIES
Investigation on the mechanical and decay resistance properties of wood modified with maleic anhydride and methyl metacrylate [Volume 30, Fall 3, 2015-2016, Pages 490-503]
MECHANICAL PROPERTIES
Investigation on mechanical properties of HDPE recycled composite filled by furfural residue produced from bagasse [Volume 30, Fall 3, 2015-2016, Pages 376-387]
MECHANICAL PROPERTIES
Evaluating the addition of cellulose nano fibers to reinforce of high yield kraft pulp produced from P.deltoides clone 69-55 [Volume 30, WINTER 4, 2015-2016, Pages 606-617]
MECHANICAL PROPERTIES
Investigation of Properties of paper made from tensile wood and normal wood in Populus nigra [Volume 30, WINTER 4, 2015-2016, Pages 653-661]
Mechanical strength
Evaluation of pulp properties produced from rice straw by combination the monoethanolamine and potassium hydroxide [Volume 30, SPRING 1, 2015-2016, Pages 46-59]
Mechanical strength
The Effect of Chitosan - Poly (vinyl alcohol) Coatings on Strength and Barrier Properties of Packaging Paper [Volume 30, Summer 2, 2015-2016, Pages 330-340]
MEDIUM DENSITY FIBERBOARD
Investigation of gluability and wettability properties of Medium Density Fiberboard produced using vine pruning fibers in combination with wood fibers [Volume 30, Summer 2, 2015-2016, Pages 289-298]
Melamine Formaldehyde
Investigation of mechanical properties particleboard based on canola stalks and poplar wood by Response Surface Method (RSM) [Volume 30, Summer 2, 2015-2016, Pages 230-242]
Metallic Ions
A Study on the Possibility of Extraction, Identification and Removal of Metallic Ions and Resins in Bleached Bagass Pulp by ECF Stages [Volume 30, SPRING 1, 2015-2016, Pages 72-84]
Micro-crystalline cellulose (MCC)
Preparation and Characterization of Micro (MCC) and Nano crystalline Cellulose (NCC) from Cotton Stem [Volume 30, Summer 2, 2015-2016, Pages 299-307]
Micronize gypsum
Improvement of dimensional stability and mechanical properties of gypsum particleboard by adding white cement [Volume 30, SPRING 1, 2015-2016, Pages 132-143]
Modification
Depended pH behavior of chitosan on surface modified fibers of Kraft pulp [Volume 30, Fall 3, 2015-2016, Pages 513-524]
MOE
Evaluation of Mechanical Properties of Homogeneous and layering Particleboards by Ultrasonic Technique [Volume 30, Summer 2, 2015-2016, Pages 341-349]
MOR
Evaluation of Mechanical Properties of Homogeneous and layering Particleboards by Ultrasonic Technique [Volume 30, Summer 2, 2015-2016, Pages 341-349]
Morphological characteristics
Morphological Characteristics and Chemical Composition of Grapevine Branches (Vitis vinifera spp.) Grown in Astara [Volume 30, WINTER 4, 2015-2016, Pages 525-537]
Morphology
The Effect Type of Chemical Treatment of Wood Material on Physical, Mechanical and Morphological Properties of Wood Flour / Polypropylene Hybrid Composite [Volume 30, SPRING 1, 2015-2016, Pages 119-131]
Morphology
Effect of chemical modification of wood flour on properties of polypropylene-nano SiO2 hybrid nanocomposite [Volume 30, WINTER 4, 2015-2016, Pages 674-689]
N
Nano crystalline cellulose (NCC)
Preparation and Characterization of Micro (MCC) and Nano crystalline Cellulose (NCC) from Cotton Stem [Volume 30, Summer 2, 2015-2016, Pages 299-307]
Nano SiO2
Effect of chemical modification of wood flour on properties of polypropylene-nano SiO2 hybrid nanocomposite [Volume 30, WINTER 4, 2015-2016, Pages 674-689]
Nanotechnology
Optimum Production of Cellulose NanoCrystal from Cotton Stalk under Acidic Hydrolysis Condition [Volume 30, SPRING 1, 2015-2016, Pages 1-13]
Nano wollastonite
Effect of nano-wollastonite, poly vinyl chloride and heavy polyethylene polymers and board structure on fire resistance of particleboard made of pepper stalk and industrial wood [Volume 30, Fall 3, 2015-2016, Pages 503-512]
Natural-fiber composite
The possibility of utilization of soy straw powder in wood/plastic composites produced with polypropylene [Volume 30, Fall 3, 2015-2016, Pages 434-446]
Nondestructive test
Evaluation of Mechanical Properties of Homogeneous and layering Particleboards by Ultrasonic Technique [Volume 30, Summer 2, 2015-2016, Pages 341-349]
O
Oak
Climate and environmental impacts on beech and oak wood
production in the Hyrcanian forests [Volume 30, Fall 3, 2015-2016, Pages 386-408]
Oil-heat treatment
Evaluate the effect of oil-heat treatment of Fir species on contact angle and adhesion strength of water based clear and acid catalyzed transparent coat [Volume 30, SPRING 1, 2015-2016, Pages 173-181]
Optical and mechanical properties
An Investigation and comparison of newsprint properties from Bamboo and Reed CMP Pulps [Volume 30, Summer 2, 2015-2016, Pages 256-265]
Optical properties
Evaluation of pulp properties produced from rice straw by combination the monoethanolamine and potassium hydroxide [Volume 30, SPRING 1, 2015-2016, Pages 46-59]
Optical properties
Investigation on newsprint paper production from wheat straw and its specification [Volume 30, Summer 2, 2015-2016, Pages 320-329]
Optical properties
Investigation on imported aspen admixture with two hardwoods
native forest species for CMP pulping [Volume 30, WINTER 4, 2015-2016, Pages 662-673]
Oxygen delignification
The potential of acid pre-hydrolyzed Soda-AQ process to manufacture highly purified α-cellulose [Volume 30, SPRING 1, 2015-2016, Pages 162-172]
P
Particleboard
Investigation of mechanical properties particleboard based on canola stalks and poplar wood by Response Surface Method (RSM) [Volume 30, Summer 2, 2015-2016, Pages 230-242]
Particleboard
Evaluation of Mechanical Properties of Homogeneous and layering Particleboards by Ultrasonic Technique [Volume 30, Summer 2, 2015-2016, Pages 341-349]
Particleboard
Stem and root comparative wood anatomy of (Calligonum comosum)
In the deserts of Iran and short sight to technical properties of fabricated of particleboard from its wood [Volume 30, WINTER 4, 2015-2016, Pages 538-551]
Peroxide hydrogen
Depended pH behavior of chitosan on surface modified fibers of Kraft pulp [Volume 30, Fall 3, 2015-2016, Pages 513-524]
Physical & Mechanical Properties
Depended pH behavior of chitosan on surface modified fibers of Kraft pulp [Volume 30, Fall 3, 2015-2016, Pages 513-524]
PHYSICAL AND MECHANICAL PROPERTIES
Study on the effect of polymer types and Quality of lignocellulosic materials on the Physical and Mechanical properties of wood/plastic composite [Volume 30, WINTER 4, 2015-2016, Pages 595-605]
Polish
Effects of waste polyester fibers on the mechanical and thermal properties of WPC products [Volume 30, WINTER 4, 2015-2016, Pages 552-566]
Polyethylene
Effect of nano-wollastonite, poly vinyl chloride and heavy polyethylene polymers and board structure on fire resistance of particleboard made of pepper stalk and industrial wood [Volume 30, Fall 3, 2015-2016, Pages 503-512]
Poly Lactic Acid
THE INVESTIGATION OF POLY LACTIC ACID /WHEAT STRAW FIBERS TREATED WITH SILANE COMPOSITES [Volume 30, Summer 2, 2015-2016, Pages 207-219]
Polypropylene
Investigating the Effect of Cotton Stalks Bark on Physical and Mechanical Properties of Cotton Stalk Flour- Polypropylene Composite [Volume 30, SPRING 1, 2015-2016, Pages 144-161]
Polypropylene
Investigation on Morphological and Mechanical Properties of Coupling Agents on Baggass Polypropylene Composites [Volume 30, SPRING 1, 2015-2016, Pages 85-96]
Polypropylene
Potential of Agricultural Residues Fibers and mineral material in Wood Plastics Composites Production [Volume 30, Summer 2, 2015-2016, Pages 220-229]
Polypropylene
Investigation on the effect of cellulose fiber surface characteristics on mechanical properties of cellulose fiber /polypropylene composite [Volume 30, Summer 2, 2015-2016, Pages 183-193]
Polypropylene
The possibility of utilization of soy straw powder in wood/plastic composites produced with polypropylene [Volume 30, Fall 3, 2015-2016, Pages 434-446]
Polyurethane clear coat
The effect of adding zinc oxide nanoparticles on color change and adhesion strength of polyurethane coating on wood surface [Volume 30, WINTER 4, 2015-2016, Pages 690-704]
Poly (vinyl alcohol)
The Effect of Chitosan - Poly (vinyl alcohol) Coatings on Strength and Barrier Properties of Packaging Paper [Volume 30, Summer 2, 2015-2016, Pages 330-340]
Poplar
Effect of zinc oxide nanoparticles synthesis precursor in hydrothermal method on structure and physical properties of poplar wood [Volume 30, Fall 3, 2015-2016, Pages 466-474]
Populus
Investigation of Properties of paper made from tensile wood and normal wood in Populus nigra [Volume 30, WINTER 4, 2015-2016, Pages 653-661]
POPULUS DELTOIDES
The potential of acid pre-hydrolyzed Soda-AQ process to manufacture highly purified α-cellulose [Volume 30, SPRING 1, 2015-2016, Pages 162-172]
Portland cement
Properties of cement made from agricultural waste [Volume 30, Fall 3, 2015-2016, Pages 457-465]
Potassium hydroxide
Evaluation of pulp properties produced from rice straw by combination the monoethanolamine and potassium hydroxide [Volume 30, SPRING 1, 2015-2016, Pages 46-59]
Printing and writing paper consumption
Forecasting of printing and writing paper consumption in Iran using artificial neural network and classical methods [Volume 30, WINTER 4, 2015-2016, Pages 632-652]
R
REED
An Investigation and comparison of newsprint properties from Bamboo and Reed CMP Pulps [Volume 30, Summer 2, 2015-2016, Pages 256-265]
Rice husk
Chemical Treatment of Rice Husk with Acetic Acid substitute for MAPE Compatibilizer in Rice Husk/High Density Poly Ethylene Composites [Volume 30, Fall 3, 2015-2016, Pages 443-456]
Rice straw
Evaluation of pulp properties produced from rice straw by combination the monoethanolamine and potassium hydroxide [Volume 30, SPRING 1, 2015-2016, Pages 46-59]
S
Sawdust
Properties of cement made from agricultural waste [Volume 30, Fall 3, 2015-2016, Pages 457-465]
Scanning Electron Microscope
Evaluation of effect of Nano SiO2 on the physical, mechanical and morphological properties of hybrid Nano composite from polypropylene-wood flour [Volume 30, Summer 2, 2015-2016, Pages 266-277]
SEM
Investigation on Morphological and Mechanical Properties of Coupling Agents on Baggass Polypropylene Composites [Volume 30, SPRING 1, 2015-2016, Pages 85-96]
Sepestan wood
Anatomical, physical and chemical properties of Sepestan wood (Cordia myxa L.) in Iranshahr region [Volume 30, SPRING 1, 2015-2016, Pages 110-118]
Setting time of gypsum
Improvement of dimensional stability and mechanical properties of gypsum particleboard by adding white cement [Volume 30, SPRING 1, 2015-2016, Pages 132-143]
SiO2 Nano particles
Evaluation of effect of Nano SiO2 on the physical, mechanical and morphological properties of hybrid Nano composite from polypropylene-wood flour [Volume 30, Summer 2, 2015-2016, Pages 266-277]
SODA
Comparative Investigation on the properties of Soda and Soda-Ethanol pulps from three hardwoods [Volume 30, Fall 3, 2015-2016, Pages 399-407]
Soy oil
Evaluate the effect of oil-heat treatment of Fir species on contact angle and adhesion strength of water based clear and acid catalyzed transparent coat [Volume 30, SPRING 1, 2015-2016, Pages 173-181]
Strength
Comparing the Performance of the Combination of Surfactant and Soap
in Wastepaper Deinking [Volume 30, SPRING 1, 2015-2016, Pages 26-36]
Sub-indices
Applying analytical hierarchy process in ranking of the effective indices on competitiveness of the wooden furniture industry in Iran [Volume 30, WINTER 4, 2015-2016, Pages 578-594]
Sunflower stalk fibers
Influence of nano metals oxide treatment on medium density fiberboard properties made of sunflower straw fibers [Volume 30, SPRING 1, 2015-2016, Pages 97-109]
Supply Chain
Evaluation of the effective indexes on industrial buyer satisfaction in the supply chain of the home wooden furniture industry in Tehran province [Volume 30, Fall 3, 2015-2016, Pages 475-490]
Surface bond strength
Investigation of gluability and wettability properties of Medium Density Fiberboard produced using vine pruning fibers in combination with wood fibers [Volume 30, Summer 2, 2015-2016, Pages 289-298]
Surfactant
Comparing the Performance of the Combination of Surfactant and Soap
in Wastepaper Deinking [Volume 30, SPRING 1, 2015-2016, Pages 26-36]
T
Tissue Paper
Optimization Process Variables of Deinked Pulp Bleaching - Improvement of Wet Tensile Strength of Tissue Paper [Volume 30, WINTER 4, 2015-2016, Pages 705-716]
Transmission electron microscopy (TEM)
The effect of adding zinc oxide nanoparticles on color change and adhesion strength of polyurethane coating on wood surface [Volume 30, WINTER 4, 2015-2016, Pages 690-704]
U
Ultrasonic waves
Evaluation of Mechanical Properties of Homogeneous and layering Particleboards by Ultrasonic Technique [Volume 30, Summer 2, 2015-2016, Pages 341-349]
UREA FORMALDEHYDE
Investigation of mechanical properties particleboard based on canola stalks and poplar wood by Response Surface Method (RSM) [Volume 30, Summer 2, 2015-2016, Pages 230-242]
V
Vine pruning fibers
Investigation of gluability and wettability properties of Medium Density Fiberboard produced using vine pruning fibers in combination with wood fibers [Volume 30, Summer 2, 2015-2016, Pages 289-298]
W
Water absorption and thickness swelling
Evaluation of effect of Nano SiO2 on the physical, mechanical and morphological properties of hybrid Nano composite from polypropylene-wood flour [Volume 30, Summer 2, 2015-2016, Pages 266-277]
Water hardness
Study of using water softening process byproduct, calcium carbonate on fine paper production [Volume 30, SPRING 1, 2015-2016, Pages 14-25]
Wet tensile index
Optimization Process Variables of Deinked Pulp Bleaching - Improvement of Wet Tensile Strength of Tissue Paper [Volume 30, WINTER 4, 2015-2016, Pages 705-716]
WHEAT STRAW
Investigation on newsprint paper production from wheat straw and its specification [Volume 30, Summer 2, 2015-2016, Pages 320-329]
White cement
Improvement of dimensional stability and mechanical properties of gypsum particleboard by adding white cement [Volume 30, SPRING 1, 2015-2016, Pages 132-143]
WOOD ANATOMY
Inter-relations between tree-ring width and vessel features in black alder (Alnus glutinosa) [Volume 30, Summer 2, 2015-2016, Pages 278-288]
WOOD ANATOMY
Stem and root comparative wood anatomy of (Calligonum comosum)
In the deserts of Iran and short sight to technical properties of fabricated of particleboard from its wood [Volume 30, WINTER 4, 2015-2016, Pages 538-551]
Wood-Cement Composite
Properties of cement made from agricultural waste [Volume 30, Fall 3, 2015-2016, Pages 457-465]
WOOD FLOUR
Investigation on utilization The mechanical of Fish wastes (WF) in manufacturing of biodegradable wood plastic composites (WPCs) and high density polyethylene (HDPE) [Volume 30, Fall 3, 2015-2016, Pages 362-375]
Wood furniture industry
Applying analytical hierarchy process in ranking of the effective indices on competitiveness of the wooden furniture industry in Iran [Volume 30, WINTER 4, 2015-2016, Pages 578-594]
Z
Zinc chloride precursor
Effect of zinc oxide nanoparticles synthesis precursor in hydrothermal method on structure and physical properties of poplar wood [Volume 30, Fall 3, 2015-2016, Pages 466-474]
Zinc oxide nanoparticles
Effect of zinc oxide nanoparticles synthesis precursor in hydrothermal method on structure and physical properties of poplar wood [Volume 30, Fall 3, 2015-2016, Pages 466-474]
Zinc oxide nanoparticles
The effect of adding zinc oxide nanoparticles on color change and adhesion strength of polyurethane coating on wood surface [Volume 30, WINTER 4, 2015-2016, Pages 690-704]
